Study an illustrative Structural Engineer resume built around the decisions, technical depth, operating scope, and measurable outcomes expected in the role. Replace every sample employer, metric, and detail with your own verified experience.
San Francisco, CA | (415) 555-0148 | julian.mercer@email.com | linkedin.com/in/julianmercer
Professional Summary
Licensed Structural Engineer with 10+ years designing steel, concrete, and seismic systems for commercial, healthcare, and mixed-use buildings. Delivers efficient frames and clear drawing sets that contractors can build with few field questions.
Professional Experience
Associate Principal
Thornton Tomasetti, San Francisco, CA
Direct structural design for a 22-story mixed-use tower in a seismic zone, managing a team of six engineers and delivering permit drawings on schedule.
Switched a transfer level from a thick slab to post-tensioned beams, saving about 600 cubic yards of concrete.
Reviewed peer calculations and approved shop drawings for steel connections across three active projects.
Coordinated with the geotechnical consultant on mat foundation options, choosing a scheme that shortened excavation by about three weeks.
Mentor five engineers through licensure study, and four passed the PE exam on their first attempt.
Reviewed construction sequencing with the steel erector to confirm temporary bracing during erection.
Senior Project Engineer
Designed a 5-story hospital addition with steel braced frames in ETABS and RAM, meeting state review comments in a single round.
Answered 180 contractor RFIs and issued revised details within three days on average.
Developed a seismic retrofit scheme for a 1960s concrete office building that avoided relocating tenants during construction.
Prepared the structural basis of design and load criteria memo that guided the whole design team and the plan checker.
Evaluated three alternative framing schemes with the architect and picked the one with the lowest steel tonnage per square foot.
Observed rebar and welding at key stages and wrote field reports for the owner.
Project Engineer
Produced gravity and lateral calculations for mid-rise steel and concrete buildings, checking results against hand estimates.
Drafted plans and sections in Revit and coordinated clashes with MEP in weekly model reviews, closing about 90 issues per project.
Inspected existing conditions on four renovations and wrote assessment letters for owners.
Checked shop drawings for rebar and miscellaneous steel and returned markups on 45 sheets within the review window.
Developed a spreadsheet for composite beam checks that the group reused on later buildings.
Core Skills
ETABS | RAM Structural System | SAP2000 | Revit | AutoCAD | Seismic design | Steel and concrete design | Post-tensioned concrete | ASCE 7 and IBC | Structural calculations | Retrofit and assessment | RFI and submittal review | Peer review | Project management
Education
M.S. in Structural Engineering, University of California, Berkeley, Berkeley, CA
Certifications
Structural Engineer (SE) License, California | Professional Engineer (PE), Civil | Fundamentals of Engineering (FE) Exam Passed
Illustrative sample resume. Company names and performance figures are examples to replace with your own verified information.
Writing strategy
How to write a Structural Engineer resume
A strong Structural Engineer resume makes ownership and outcomes easy to find. Show the problem, the action you personally drove, the scale or constraint, and the result. Use role-specific language only when the surrounding bullet proves that capability.
Lead with structural design
Show where structural design changed a customer, product, revenue, or operating result.
Prove seismic and code compliance
Name the decisions, methods, systems, and constraints behind the result—not just the activity.
Quantify constructability and material efficiency
Use scale, speed, quality, adoption, or financial measures that a hiring team can evaluate.
Make ownership explicit
Separate what you personally led from what the wider team delivered and name key partners.
Keep your summary to two or three lines. Name your level, strongest area of ownership, and the outcomes you are equipped to improve.
General
Structural Engineer with evidence across ETABS, RAM Structural System, SAP2000, Revit, and measurable business outcomes.
Execution
Structural Engineer experienced in AutoCAD, Seismic design, Steel and concrete design, Post-tensioned concrete, cross-functional delivery, and operating at scale.
Impact
Structural Engineer who connects structural design and seismic and code compliance to material quantity saved, RFI response time and review rounds, projects delivered on schedule.
Experience section
Structural Engineer experience bullet examples
Choose bullets that match your actual work. Replace every sample number with a result you can explain and defend.
Associate Principal impact
Direct structural design for a 22-story mixed-use tower in a seismic zone, managing a team of six engineers and delivering permit drawings on schedule.
Switched a transfer level from a thick slab to post-tensioned beams, saving about 600 cubic yards of concrete.
Reviewed peer calculations and approved shop drawings for steel connections across three active projects.
Coordinated with the geotechnical consultant on mat foundation options, choosing a scheme that shortened excavation by about three weeks.
Mentor five engineers through licensure study, and four passed the PE exam on their first attempt.
Reviewed construction sequencing with the steel erector to confirm temporary bracing during erection.
Senior Project Engineer impact
Designed a 5-story hospital addition with steel braced frames in ETABS and RAM, meeting state review comments in a single round.
Answered 180 contractor RFIs and issued revised details within three days on average.
Developed a seismic retrofit scheme for a 1960s concrete office building that avoided relocating tenants during construction.
Prepared the structural basis of design and load criteria memo that guided the whole design team and the plan checker.
Evaluated three alternative framing schemes with the architect and picked the one with the lowest steel tonnage per square foot.
Observed rebar and welding at key stages and wrote field reports for the owner.
Project Engineer impact
Produced gravity and lateral calculations for mid-rise steel and concrete buildings, checking results against hand estimates.
Drafted plans and sections in Revit and coordinated clashes with MEP in weekly model reviews, closing about 90 issues per project.
Inspected existing conditions on four renovations and wrote assessment letters for owners.
Checked shop drawings for rebar and miscellaneous steel and returned markups on 45 sheets within the review window.
Developed a spreadsheet for composite beam checks that the group reused on later buildings.
Keywords and evidence
Skills and metrics to include
Prioritize skills that appear in the target job description and that your experience section can support with evidence. For a Structural Engineer, the strongest skill section balances domain judgment, execution, measurement, and cross-functional work.
Structural Engineer skills
ETABSRAM Structural SystemSAP2000RevitAutoCADSeismic designSteel and concrete designPost-tensioned concreteASCE 7 and IBCStructural calculationsRetrofit and assessmentRFI and submittal reviewPeer reviewProject management
Metrics worth quantifying
Business impactmaterial quantity saved
ExecutionRFI response time and review rounds
Quality and scaleprojects delivered on schedule
LeadershipScope, stakeholders, adoption, and decision velocity
Hiring signals
What recruiters look for
Credible structural design ownership
Hands-on seismic and code compliance
Measured constructability and material efficiency
Clear progression and scope
Role-specific tools used in context
Claims that can be defended in an interview
Weak bullets versus stronger rewrites
Weak
Responsible for structural design.
Stronger
Direct structural design for a 22-story mixed-use tower in a seismic zone, managing a team of six engineers and delivering permit drawings on schedule.
Why it works: Replaces a duty with scope, action, and a measured outcome.
Weak
Helped improve seismic and code compliance.
Stronger
Switched a transfer level from a thick slab to post-tensioned beams, saving about 600 cubic yards of concrete.
Why it works: Shows the specific lever, operating context, and result.
Quality check
Common Structural Engineer resume mistakes
01
Repeating the job description
02
Listing tools without evidence
03
Using metrics with no baseline or timeframe
04
Hiding personal ownership
05
Overloading bullets with several unrelated outcomes
06
Copying illustrative employers or numbers
ATS-friendly checklistThe downloadable resume follows these rules.
Single-column reading order
Standard section headings
No tables, graphics, or skill bars
Selectable text in PDF and DOCX
Conventional dates and job titles
Keywords used in natural context
Frequently asked questions
Structural Engineer resume FAQ
How long should a Structural Engineer resume be?
Use one page when your most relevant experience fits without crowding. Two pages are reasonable for a senior candidate with substantial scope, but every bullet should still earn its place.
Which keywords belong on a Structural Engineer resume?
Mirror accurate language from the job description. Relevant examples include ETABS, RAM Structural System, SAP2000, Revit, AutoCAD, Seismic design. Do not add a keyword unless your experience can support it.
What should a Structural Engineer quantify?
Quantify the measures closest to the role's decisions: material quantity saved; RFI response time and review rounds; projects delivered on schedule. Include the baseline or timeframe when it changes the meaning.
Should a Structural Engineer resume list tools?
Yes, when the tools are relevant to the target role. Place the most important ones in the skills section and show how you used them to make a decision, ship work, improve quality, or produce a measurable result.
Can I copy the employers and numbers in this example?
No. The employers, projects, and metrics are illustrative. Replace them with accurate details from your own work and keep only claims you can explain in an interview.