Skilled Trades resume example

CNC Machinist Resume

Study an illustrative CNC Machinist resume built around the decisions, technical depth, operating scope, and measurable outcomes expected in the role. Replace every sample employer, metric, and detail with your own verified experience.

  • ATS-friendly structure
  • Achievement-led bullets
  • Updated November 2026

CNC Machinist resume preview

Julian Mercer

CNC Machinist

San Francisco, CA | (415) 555-0148 | julian.mercer@email.com | linkedin.com/in/julianmercer

Professional Summary

CNC Machinist with 7+ years programming, setting up, and running mills and lathes for aerospace and aircraft parts. Holds tight tolerances, inspects with precision tools, and improves cycle time without sacrificing quality.

Professional Experience

CNC Machinist
Precision Castparts, Portland, OR
  • Set up and run 5-axis mills on titanium and nickel parts while holding tolerances of plus or minus 0.0005 inch on critical features.
  • Write and prove programs in Mastercam, cutting cycle time on a bracket family by 14% with revised toolpaths and tool changes.
  • Inspect parts with micrometers, bore gauges, and a CMM and keep scrap under 1% on repeat jobs across the cell.
  • Select cutting tools and speeds for difficult alloys, extending insert life by about a quarter and reducing tool change stops.
  • Document setups with photos and tool lists so second shift can start jobs without long handoffs or repeated questions.
  • Mentor two junior operators on offsets, probing, and first-article inspection, and both now run jobs without a lead nearby.
  • Join weekly quality meetings to review nonconformances and propose fixture changes that prevent repeat defects on later lots.
CNC Operator and Machinist
Textron Aviation, Wichita, KS
  • Ran three-axis mills and lathes producing aluminum aircraft components to blueprint and met delivery dates on 97% of lots.
  • Moved from operator to machinist in the first year after passing setup and inspection assessments given by the lead.
  • Edited G-code at the control to fix feed and speed problems, which saved about two hours of programmer time each week.
  • Built simple fixtures and soft jaws that reduced setup time on a recurring job from 90 minutes to 55 minutes.
  • Performed first-article and in-process inspections and recorded the results for traceability on every released lot.
  • Followed housekeeping and safety standards, and the cell completed a full year with no lost-time injuries or incidents.
  • Cross-trained on the horizontal mill and covered absences, which kept machines running during two staffing shortages.

Core Skills

CNC programming | Mastercam | G-code | Precision measurement | 5-axis machining | CNC lathe | Blueprint reading | GD&T | CMM inspection | Fixture design | Tool selection | First-article inspection | Titanium and aluminum machining | Setup reduction

Education

Certificate in Precision Machining Technology, Wichita State University Campus of Applied Sciences and Technology, Wichita, KS

Certifications

NIMS Machining Level I Credential | OSHA 10-Hour General Industry

Illustrative sample resume. Company names and performance figures are examples to replace with your own verified information.

Writing strategy

How to write a CNC Machinist resume

A strong CNC Machinist resume makes ownership and outcomes easy to find. Show the problem, the action you personally drove, the scale or constraint, and the result. Use role-specific language only when the surrounding bullet proves that capability.

Lead with CNC programming

Show where cnc programming changed a customer, product, revenue, or operating result.

Prove precision measurement

Name the decisions, methods, systems, and constraints behind the result—not just the activity.

Quantify tolerance and cycle time

Use scale, speed, quality, adoption, or financial measures that a hiring team can evaluate.

Make ownership explicit

Separate what you personally led from what the wider team delivered and name key partners.

Useful bullet formulaAchieved X, measured by Y, by doing Z.Read the XYZ formula
Professional summaries

CNC Machinist summary examples

Keep your summary to two or three lines. Name your level, strongest area of ownership, and the outcomes you are equipped to improve.

General

CNC Machinist with evidence across CNC programming, Mastercam, G-code, Precision measurement, and measurable business outcomes.

Execution

CNC Machinist experienced in 5-axis machining, CNC lathe, Blueprint reading, GD&T, cross-functional delivery, and operating at scale.

Impact

CNC Machinist who connects cnc programming and precision measurement to tolerance held and scrap rate, cycle time and setup reduction, on-time lots and first-article results.

Experience section

CNC Machinist experience bullet examples

Choose bullets that match your actual work. Replace every sample number with a result you can explain and defend.

CNC Machinist impact

  • Set up and run 5-axis mills on titanium and nickel parts while holding tolerances of plus or minus 0.0005 inch on critical features.
  • Write and prove programs in Mastercam, cutting cycle time on a bracket family by 14% with revised toolpaths and tool changes.
  • Inspect parts with micrometers, bore gauges, and a CMM and keep scrap under 1% on repeat jobs across the cell.
  • Select cutting tools and speeds for difficult alloys, extending insert life by about a quarter and reducing tool change stops.
  • Document setups with photos and tool lists so second shift can start jobs without long handoffs or repeated questions.
  • Mentor two junior operators on offsets, probing, and first-article inspection, and both now run jobs without a lead nearby.
  • Join weekly quality meetings to review nonconformances and propose fixture changes that prevent repeat defects on later lots.

CNC Operator and Machinist impact

  • Ran three-axis mills and lathes producing aluminum aircraft components to blueprint and met delivery dates on 97% of lots.
  • Moved from operator to machinist in the first year after passing setup and inspection assessments given by the lead.
  • Edited G-code at the control to fix feed and speed problems, which saved about two hours of programmer time each week.
  • Built simple fixtures and soft jaws that reduced setup time on a recurring job from 90 minutes to 55 minutes.
  • Performed first-article and in-process inspections and recorded the results for traceability on every released lot.
  • Followed housekeeping and safety standards, and the cell completed a full year with no lost-time injuries or incidents.
  • Cross-trained on the horizontal mill and covered absences, which kept machines running during two staffing shortages.
Keywords and evidence

Skills and metrics to include

Prioritize skills that appear in the target job description and that your experience section can support with evidence. For a CNC Machinist, the strongest skill section balances domain judgment, execution, measurement, and cross-functional work.

CNC Machinist skills

CNC programmingMastercamG-codePrecision measurement5-axis machiningCNC latheBlueprint readingGD&TCMM inspectionFixture designTool selectionFirst-article inspectionTitanium and aluminum machiningSetup reduction

Metrics worth quantifying

Business impacttolerance held and scrap rate
Executioncycle time and setup reduction
Quality and scaleon-time lots and first-article results
LeadershipScope, stakeholders, adoption, and decision velocity
Hiring signals

What recruiters look for

  • Credible cnc programming ownership
  • Hands-on precision measurement
  • Measured tolerance and cycle time
  • Clear progression and scope
  • Role-specific tools used in context
  • Claims that can be defended in an interview

Weak bullets versus stronger rewrites

Weak

Responsible for cnc programming.

Stronger

Set up and run 5-axis mills on titanium and nickel parts while holding tolerances of plus or minus 0.0005 inch on critical features.

Why it works: Replaces a duty with scope, action, and a measured outcome.
Weak

Helped improve precision measurement.

Stronger

Write and prove programs in Mastercam, cutting cycle time on a bracket family by 14% with revised toolpaths and tool changes.

Why it works: Shows the specific lever, operating context, and result.
Quality check

Common CNC Machinist resume mistakes

  1. 01

    Repeating the job description

  2. 02

    Listing tools without evidence

  3. 03

    Using metrics with no baseline or timeframe

  4. 04

    Hiding personal ownership

  5. 05

    Overloading bullets with several unrelated outcomes

  6. 06

    Copying illustrative employers or numbers

ATS-friendly checklistThe downloadable resume follows these rules.
  • Single-column reading order
  • Standard section headings
  • No tables, graphics, or skill bars
  • Selectable text in PDF and DOCX
  • Conventional dates and job titles
  • Keywords used in natural context
Frequently asked questions

CNC Machinist resume FAQ

How long should a CNC Machinist resume be?

Use one page when your most relevant experience fits without crowding. Two pages are reasonable for a senior candidate with substantial scope, but every bullet should still earn its place.

Which keywords belong on a CNC Machinist resume?

Mirror accurate language from the job description. Relevant examples include CNC programming, Mastercam, G-code, Precision measurement, 5-axis machining, CNC lathe. Do not add a keyword unless your experience can support it.

What should a CNC Machinist quantify?

Quantify the measures closest to the role's decisions: tolerance held and scrap rate; cycle time and setup reduction; on-time lots and first-article results. Include the baseline or timeframe when it changes the meaning.

Should a CNC Machinist resume list tools?

Yes, when the tools are relevant to the target role. Place the most important ones in the skills section and show how you used them to make a decision, ship work, improve quality, or produce a measurable result.

Can I copy the employers and numbers in this example?

No. The employers, projects, and metrics are illustrative. Replace them with accurate details from your own work and keep only claims you can explain in an interview.

Closest roles

Roles closest to CNC Machinist

Guides in the same field with overlapping skills, plus the next steps up and back in the same line of work.

See every Skilled Trades resume
Ready to make it yours?

Start with strong evidence. Replace it with your own.

Download the resume and adapt every achievement to your actual experience.

Download resume